Certification Services

Authorized by major institutions around the world, one-stop service for certification and testing

CE/RED

Before wireless products can be legally sold in EU countries, they must be tested and approved according to the RED directive, and they must also have a CE-mark. Wireless remote control products must comply with the requirements of the RED directive RED 2014/53/EU.

Region: EU
Service telephone 400-7558988
More Introduction

1. Introduction to EU CE RED certification

Before wireless products can be legally sold in EU countries, they must be tested and approved according to the RED directive, and they must also have a CE-mark. Wireless remote control products must comply with the requirements of the RED directive RED 2014/53/EU.

a. RED is the abbreviation of Radio Equipment Directive, a directive for the compliance of wireless products.

b. The RED directive stipulates that wireless products need to meet the requirements of health, EMC, Radio, and LVD, of which LVD needs to meet regardless of the power supply method of the product.

c. Use the Radio non-coordinated standard to force the application for NB. Using the coordinated standard, you can choose whether to apply for NB, which depends on the specific needs of the customer.

The d.RED directive is also a declaration of conformity, which is the same as other directives.

 

2. CE-RED certification standard

Wireless type

Test standard (without LVD)

125KHz

RF ID

EN300330

EN301489-1/-3

EN62311

13.56MHz RFID

EN300330

EN301489-1/-3

EN62479

27M

EN300220-1/-2

EN301489-1/-3

EN62479

433M

EN300220-1/-2

EN301489-1/-3

EN62479

2.4G BT, Zigbee, wifi

EN300328

EN301489-1/-17

EN62479 or 62311

Wireless charging products

EN303417

EN301489-1/-3

EN62311

5G WIFI

1 band, without DFS

EN301893

EN301489-1/-17

EN62311

5G WIFI

2 bands without DFS

EN300440 EN301489-1/-17 EN62311

5G WIFI

3 bands with DFS

EN301893

EN301489-1/-17

EN62311

5G WIFI full frequency band+2.4GWIFI

EN301893/300328/300440

EN301489-1/-17

EN62311

5.8G products

EN300440

EN301489-1/-3

EN62311

 

3. CE RED certified products

1. Short-distance wireless remote control products (SRD) such as: remote control toy cars, remote control alarm systems, remote control doorbells, remote control switches, remote control mice, keyboards, etc.;

2. Professional radio remote control products (PMR) such as: professional wireless walkie-talkies, wireless microphones, etc.;

3. Wireless phone CTO, CT1;

4. ISDN (digital telephone products);

5. DECT (Enhanced Digital Cordless Telephone);

6. Mobile phone GSM, CDMA test;

7. Bluetooth products such as: Bluetooth headset;

8. Inductive data transmission equipment with operating frequency < 9 kHz;

9. Wireless broadcast receiver equipment.

 

4. CE RED certification test project

1. Electromagnetic compatibility test (EMC test);   

2. Safety test LVD (in the new directive, this test is also required for RF products with battery input);   

3. Conduct radio communication equipment test (RF test) according to European ETSI standard;   

4. Notification of permitted spectrum in Europe;   

5. CTR (TBR) test;  

6. Electrical safety and health protection test (SAR assessment).

 

5. Information required for CE RED certification

1. Operational Description Line description (English);

2. Block Diagram block diagram (all crystal oscillators and crystal oscillator frequencies need to be drawn and consistent with the circuit diagram);

3. User Manual;

4. Schematics circuit diagram (must be consistent with the crystal oscillator frequency, number of crystal oscillators and crystal oscillator position in the block diagram)

5.Label label;

6. Technical parameters of wireless module (frequency range, number of channels, maximum transmit power, antenna gain, modulation method, etc.)

 

6. Prototype requirements for CE RED certification

1. One RF fixed frequency prototype, one common prototype

2. The fixed-frequency prototype is for multi-channel working products. If it is a single-channel prototype, please provide a continuous transmission prototype and a continuous reception prototype

 

7. CE RED certification process

Receive the sample test, write a report after the test is completed, and issue an ANCI certificate. If you apply for NB, you need to organize the data and reports and submit them to the NB institution. After the institution has passed the review, the NB certificate will be issued.

 

8. CE RED certification body

ANCI has a global certification and testing team dedicated to wireless products and a large testing base of 13,000 square meters. It strictly implements quality control in accordance with the laboratory accreditation system specification ISO/IEC 17025. Authorized CBTL testing laboratory, American UL/A2LA (4422.01), British ITS, South Korea KTC, German TÜV, Belgium Eurofines and other major international certification agencies are authorized and accredited, and it is your ideal partner for CE-RED certification.


5s response, 15min quotation

ANCI specialists serve you one-on-one

400-7558988

Apply online, Free assessment of your exclusive certification scheme

Please fill in the true information and we will contact you within 24 hours!

*

*

*

Consulting
More Certifications
More
Certification Standards
Overview
Region
UL
UL
UL is short for Underwriter Laboratories Inc. The …
America
Apply
Amazon UL
Amazon UL
With the continuous improvement of Amazon's st…
America
Apply
CB
CB
The IECEE-CB system is a system for the global mut…
International
Apply
CCC
CCC
The full name of China's CCC certification is …
China
Apply
ETL
ETL
ETL is the abbreviation of Electrical Testing Labo…
America
Apply

TEL

Service Hotline400-7558988 18826804895

WeChat

二维码Scan WeChat

QQ

QQ Consulting2902506472